Standard Dinghy Kits

Brede

Full Kit Contents

Cut from a high quality Marine plywood,

You will receive all the hull panels with stitch holes drilled, wood for the trim (gunwales, inwales) and a yoke. Bulkheads and decks are included to form the bouyancy chambers with hatches and the holes cut for them. Various other options could be incuded.

See individual kits for full contents

Plywood Only Pack Contents

Cut from the same high quality plywood you will receive all the hull panels.

This will include any bulkheads, decks or frames that are required for that design.

The stitch holes are drilled.

Hatch holes will not be cut unless requested.

See individual kits for full contents

If you require anything not listed with the kits or an extra you require, please contact us.

You can now pay for your kit in 3 interest free instalments.

(Click Details and Options for amount or contact us)

Prices below do not include any current discounts or offers. Click Details & Options for current prices.

Lead times are currently 7 - 15 days.

Delivery included to UK Mainland

Highlands & Islands add further £48.00

Rye Bay

Rye Bay 228
An easy to build dinghy which can be rowed, motored and sailed. It takes around 25hrs to build from the full kit and you can have the hull stitched together on the same day you receive it.
This dinghy will take up to a 30lb thrust electric outboard with the battery box under the centre thwart. These lightweight dinghies are easily driven and do not require a lot of power to drive them. A 1hp petrol outboard is the maximum power size engine for this dinghy weighing between 9 and 12kg. Heavier engines (not recommended) as will require added weight forward and sitting further forward.

Full Kit - £725.00
Contents - All hull half panels CNC cut with stitch holes drilled including frames, stem and transom. Epoxy pack with resin, hardener, dispenser pumps, fillet additive, cable ties, fibreglass tape, gloves, mixing sticks and pots. Everything needed to build the hull ready for preparation for paint and varnish.
Plywood Only Pack - £400.00
Contents - All hull half panels CNC cut with stitch holes drilled includes frame(s) and transom.

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only

Rye Bay Standard Kit

£400.00

Back to Top

Karun

Karun Pram 8

Loa: 2.36m (7’ - 9”)
Beam: 1.17m (3’ - 10”)
Draft: 0.127m (0’ - 5”)
Dry Weight: 22kg (50lb)
Another easy to build dinghy that takes around 25hrs to build. It is a "V" bottomed hull with one plank per side. Pram dinghies make for a spacious boat and this one is no exception. Ideal workhorse as a tender for a larger boat or a canal picnic cruise with an electric outboard.

Full Kit - £775.00

Contents - All hull half panels CNC cut with stitch holes drilled including frames and transoms. Epoxy pack with resin, hardener, dispenser pumps, fillet additive, cable ties, fibreglass tape, gloves, mixing sticks and pots. Everything needed to build the hull ready for preparation for paint and varnish.
Plywood Only Pack - £425.00
Contents - All hull half panels CNC cut with stitch holes drilled includes frame(s) and transoms.

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only

Karun Pram 8 Standard Kit

£425.00

Poppy's first day out 161a - Copy (800x405).jpg

Back to Top

Pevensey

Pevensey 2.2

Loa: 2.23m (7’ - 4”)
Beam: 1.19m (3’ - 11”)
Draft: 0.115m (0’ - 4.5”)
Dry Weight:18kg (40lb)

The "PEVENSEY 2.2" takes the place of the older Pevensey 7. It is 7' - 4" long x 3' - 11" wide (maximum) and approximately 40lb (18kg) dry weight. A lightweight tough little boat with 6mm bottom and 4mm sides or 6mm all round for a tougher though a little heavier boat for heavy duty jobs. She will take a small outboard motor (2hp) but performs well with electric and is easy to row with a skeg fitted. She is most at home on sheltered waters (Category “D”) and has found her main use as a tender to a larger, inland waterways craft. It has also been used for lake fishing. This boat is light enough to be carried by one person and is easily transported on a roof rack on an average family car.

Full Kit - £725.00

Contents - All hull half panels CNC cut with stitch holes drilled including frames and transoms. Epoxy pack with resin, hardener, dispenser pumps, fillet additive, cable ties, fibreglass tape, gloves, mixing sticks and pots. Everything needed to build the hull ready for preparation for paint and varnish.

Plywood Only Pack - £400.00

Contents - All hull half panels CNC cut with stitch holes drilled includes frame(s) and transom.

Any questions, please email us. Thank you.

Free Delivery to UK Mainland Only

Pevensey 2.2 Stanadard Kit from

£400.00

Back to Top

Brede

Brede Pram 8

Loa: 2.36m (7’ - 9”)
Beam: 1.17m (3’ - 10”)
Draft: 0.127m (0’ - 5”)
Dry Weight: 45lb (20.5kg)

These plans are for the "BREDE PRAM". A small, flat bottomed, rowing pram dinghy that can be used for fishing on the local inland water or perhaps as a tender to a larger boat. She is 7’ - 5" in length, 3’ - 11" wide and designed to be light enough to be carried by one person and transported on the roof rack of almost any car or on a small trailer. For power, an electric motor is best for the weight hanging on the transom.These plans are the basic plans to build the hull shell with one seat.

Full Kit - £725.00