Loa 2.26m (7’ – 6”)
Beam 1.19m (3’ – 11”)
Draft 0.127m (0’ – 5”)
Dry Weight 22.5kgs (50lbs)
​Engine  -  maximum 24lb thrust electic or 1hp petrol
 
The Winchelsea 2.2 is available as a kit and as DIY plans. It is a little smaller than the Winchelsea 8 and the planks can be cut from a standard sheet of 2.44m x 1.22m plywood - no scarfing required. It is different from its larger sister as it does not have a long keel which is replaced by a flat keel plank onto which a length of timber and a skeg are fitted. The open edge of the stem is capped with thin strips of wood that are carefully bent round to join at the keel. The flat keel plank makes for an easier build but it is still built in the same way - over a mould. However, it could be built using stitch & tape if you don’t mind the stitch holes. If you’re painting your hull inside and out, this is not a problem but, if you want to varnish your hull then I wouldn’t use it.
 
Full Plywood Epoxy Kit - 
Contains 3 packs, everything you need to build the hull to a stage where you only need to add paint/ varnish and a set of oars or a motor.
Pack 1. Wood & Plywood pack. CNC cut planks, bottom panel, frame and transom, ready for assembly. The wood for the seats and trim is also included.
Pack 2. Epoxy Resin Pack. The epoxy resin and hardenerwith dispensing pumps, fillet additive, mixing sticks, mixing pots, epoxy brushes and protective gloves as required .
Pack 3. Cable ties and other sundry items.
 
Plywood Only Pack contents - All hull panels CNC cut with stitch holes drilled includingcentre frame and transom.
 
Shipping to UK Only
Kit prices include delivery to UK Mainland Only -
Highlands & Islands and N.I. have a courier surcharge of at least £48 added.Please contact us for these areas or if you need any further information.​
Sorry, we cannot deliver outside UK.