Loa: 2.23m (7’ - 4”)
Beam: 1.19m (3’ - 11”)
Draft: 0.115m (0’ - 4.5”)
Dry Weight:18kg (40lb)
 
The "PEVENSEY 2.2" takes the place of the older Pevensey 7. It is 7' - 4" long x 3' - 11" wide (maximum) and approximately 40lb (18kg) dry weight. A lightweight tough little boat with 6mm bottom and 4mm sides or 6mm all round for a tougher though a little heavier boat for heavy duty jobs. She will take a small outboard motor (2hp) but performs well with electric and is easy to row with a skeg fitted. She is most at home on sheltered waters (Category “D”) and has found her main use as a tender to a larger, inland waterways craft. It has also been used for lake fishing. This boat is light enough to be carried by one person and is easily transported on a roof rack on an average family car.
 
  
Basic Materials Required (for complete hull) 
2 x 6mm x 2.44m x 1.22m Plywood - 3kg Epoxy Pack – 2ltr fillet mix – 25m x 100mm FG Tape – 3m x 200mm x 12mm (min) – 18mm (max) Timber for seats, 6 x 2.4m x 12mm x 21mm for trim (min size), 100 x 4.8mm x 300mm cable ties.
 
Plans Packages – 
Digital Download Plans  -   From the download option
A3 Printed Workshop Plans  -   A3 drawings with full instruction manual
Full Size Paper Patterns Plans   -   Full size paper patterns of the main hull components with full instruction manual